Ceramic protection | PADXPRESS


New product

Long lasting protection layer.

- A protective film comprised of ceramic nanoparticles to set.
- Colours and provide shine and brightness.
- Waterproofing and antifouling.
- High resistance to impacts.
- Ceramic protection for two 7-9 metre boats.

envío gratuito

More details

149,00 €tax incl.

- +


More info

Ceramic Protection

Boat hulls rust over time and lose their shine and brightness, giving the impression of a boat in poor conditions.
Using ceramic protection using ceramic protection (a protective film comprised of ceramic nanoparticles) after applying one
of the DABS Nautic rejuvenators, for paint (PB500) or for gelcoat (PB800), is strongly recommended to effortlessly renovate
your boat hull.
It provides additional shine and brightness (around 30% more) in addition to a long-lasting protective film. It’s anti-adherent,
resistant to impacts and provides real waterproofing.




Ceramic Protection PadXpress

Now you can enhance and protect your boat’s shine and brightness with a high performance ceramic treatment in a very cost effective and easy to use polishing pad and provides a long lasting solution that far exceeds the performance of conventional waxes.

Download (1.57M)

1 . The ceramic protection shall be applied to a non-rusted surface and preferably without holograms.
2 . Place the buffer pad on the polisher at a maximum operating speed of 1500 rev./min.
3 . Apply the buffer pad to the part to be polished when clean and dry.
4 . Put vertical pressure on the buffer pad to release the product from the reservoir and work in criss-cross
movements while keeping slight pressure on the buffer pad for good contact.
5 . Repeat the operation as many times as necessary based on the surface to be treated.


It’s best to protect clothing and use gloves during application. do not swallow. avoid all contact with the eyes.
Do not pour any residue into the sewage.
Dispose of the buffer pad at an authorised collection centre.
Do not use the buffer pad for anything other than the intended use.
It’s best to keep the buffer pad in a dry place away from the light and use it within 12 months after opening.


8 other products in the same category:

Customers who bought this product also bought: